RECOVERY O2 MASKS
Recovery Oxygen Masks feature a rubber-mounted 22mm/oxygen adaptor fitted to a tough polycarbonate mask with dual vents, not valves, thereby allowing unrestricted inhalation and exhalation.
- If oxygen flow is set (or becomes closed) too low for the patient's needs, vents allow the patient to inhale supplementary ambient
- If the oxygen flow is set (or becomes) too high for the patient, then the vents allow excess oxygen to escape
An optional hook and strap to help secure the mask is available.
Our Recovery Oxygen Masks are made from the most durable materials available
- The mask is wide section polycarbonate
- Polycarbonate adaptor is rubber-mounted so it will not crack when dropped
- Diaphragm is made from high tear resistant, chemical resistant thermoplastic rubber
- Most competing masks crack where the connector meets the mask body. This is because they are molded in one piece to save costs
- Often the diaphragm on competing masks cracks and tears easily. This is generally because they are either made from material which is lower cost and incompatible with polycarbonate (which draws the elastomer from the diaphragm) OR the material is unable to withstand contact with cleaning chemicals
- The material in our diaphragms is neutral with polycarbonate and has high chemical resistance so it will last much longer
